Nantong Yutai Chemical Products Co., Ltd.
Service Hotline 18021381296
company's product
contact us

Nantong Yutai Chemical Products Co., Ltd. Sales Department:
Phone: 0513-81063598
Foreign trade telephone: 0513-86681995
Customer Service Department:
Customer Service / After Sales: 0513-81063598
Company fax: 0513-81063598
E-mail: ht@haotaichem.com
Contact: Manager Liu
Mobile: 18021381296
Address: Building 1, No. 388, Yongxing Avenue, Gangzha District, Nantong City (4th Floor, Block A, Building 3, Haoying International Energy Center)

newsYou are here:Home - news - Content
Commonly used soft foam polyurethane catalyst
Edit:Nantong Yutai Chemical Products Co., Ltd.   UpDate:2019-10-11

Polyurethane Catalyst NT CAT 102 is a delayed type complex amine strong gel catalyst. It contains no metal components, is environmentally friendly, has low odor, and has a mild reaction at room temperature. The system temperature reaches 60~65 °C and reacts quickly. Two-component adhesive, coating, Elastomers, bridging agents, high temperature fast drying accelerators, fabric coatings, leather finishes, etc. It is recommended to add 0.05-0.30PPHP (per 100 parts of polyol);

NT CAT 150 is a delayed type complex amine gel catalyst with a low reaction temperature at room temperature. When the deblocking temperature (60 to 70 ° C) is reached, it rapidly catalyzes the reaction. It is mainly used in two-component polyurethane foams, adhesives and coatings. In the production of acrylic coatings and other industries, it is recommended to add 0.20-0.50PPHP (per 100 parts of polyol);

NT CAT 54 is an acid-terminated tertiary amine catalyst primarily used to promote carbamate (polyol isocyanate) reactions and delay reaction initiation. Mainly used in polyurethane molded foam to extend the shading time and improve fluidity. To improve the processing efficiency of the foam, it is recommended to add 0.20-0.50PPHP (per 100 parts of polyol);

NT CAT 603 gel-type catalyst can reduce the deblocking temperature of isocyanate, improve the peel strength of the product, and at the same time improve the insulation performance of the product and improve the surface finish of the product. Suitable for polyurethane insulation coatings and adhesives. The recommended dosage is 0.10-0.30 PPHP (per 100 parts of polyol);

NT CAT A-1 strong foaming catalyst? A-1 catalysts are mainly used in the production of soft polyether polyurethane foams, but also in rigid foam packaging. It is recommended to add 0.05-0.30 PPHP (per 100 parts of polyol).

The NT CAT A-107 conjugated amine catalyst promotes the foaming reaction and has a retarding effect, which reduces the demolding time and improves the openness. It is recommended to add 0.05-0.30PPHP (per 100 parts of polyol);

NT CAT A-300 delayed cross-linking catalyst for polyurethane mats for car seats and backrests. The foam will have good cell opening properties while maintaining the stability of the foaming formulation and will not collapse for use. A system containing MDI, a fast reaction rate, and a slower flow can increase the fluidity of the foam. The recommended dose is 0.05-0.30 PPHP (per 100 parts of polyol).


Back